China 70: 1 Ratio 45n. M Torque Planetary Gearbox compound planetary gearbox

Merchandise Description

 

Solution Description

The reducer is generally utilized for minimal-speed and large-torque transmission tools. The motor, inside combustion motor or other substantial-velocity working electricity is utilized to attain the purpose of deceleration by meshing with the huge equipment on the output shaft through a gear with a modest number of teeth on the enter shaft of the reducer. The reducer will also have several pairs of gears with the exact same theory to accomplish the perfect reduction effect. The ratio of the quantity of enamel of the huge and small gears is the transmission ratio.
 

SPECIFICATIONS Phase RATIO RATED TORQUE (N.m)
SPLF60-60mm Planetry Gear Reducer  L1 4 25
five 28
seven 20
10 10
L2 sixteen 30
20 30
25 32
28 30
35 30
40 25
50 25
70 20
Adapted motor ∅ 14-thirty/ ∅50-3/∅70-M4
Rated Input Speed (rpm) 3000/min
Max Enter Velocity (rpm) 6000/min
Backlash L1 ≤10 Arcmin
L2 ≤15 Arcmin
Fault stop torque(N.m) 2 occasions of rated torque
Efficiency L1 96%
L2 94%
Average existence span 20000h
Operating temperature -10°~+90°
Nosie  ≤60 db
Weight (kg) L1 0.75
L2 1
IP 54
Installation method Any set up strategy

 

Manufacturing Range

 

42 Series Planetary Gearbox

Backlash: ten-15 arcmin

Ratio Choice:

L1: 4,5,7,10,

L2: twelve,16,20,twenty five,28,35,40,50,70

Frame Dimension: 42mm Enter Flange

Equipment Arrangement: Planetary Straight Enamel

60 Series Planetary Gearbox

Backlash: ten-fifteen arcmin

Ratio Choice:
L1: 4,5,7,10,
L2: sixteen,twenty,25,28,35,forty,50,70
Frame Dimension: 60mm Enter Flange
Gear Arrangement: Planetary Straight Teeth

ninety Collection Planetary Gearbox

Backlash: 10-15 arcmin
Ratio Selection:
L1: 4,5,7,10,
L2: 16,20,25,28,35,forty,50,70
Frame Dimension: 90mm Enter Flange
Equipment Arrangement: Planetary Straight Tooth

Powder Steel Series Planetary Gearbox

Backlash: 10-fifteen arcmin
Ratio Selection:
L1: 4,5,7,ten,
L2: sixteen,20,25,28,35,forty,50,70
Frame Dimension: 42mm & 57mm
Gear Arrangement: Planetary Straight Tooth

Correct Angle Series Planetary Gearbox

Backlash: 10-15 arcmin
Ratio Assortment:
L1: 4,5,7,10,

L2: sixteen,20,twenty five,28,35,40,50,70
Frame Dimension: 60mm & 90mm
Equipment Arrangement: Planetary Straight Teeth

 

Application Field

Automated Arms

 

Assembly Line

 

3D-Printer

 

Medical -Products

 

CNC Equipment

 

Tapping Machine

 

Other Automation Units

 

Why Select Us

 

ZheJiang Substantial Precision Gear Transmission Co., Ltd

 

 

 

Organization Profile

 

 

ZheJiang Higher Precision Gear Transmission Co., Ltd positioned in HangZhou town, ZheJiang Province, China. It is a major business dedicated in precision transmission areas and technique investigation, manufacture and income, various series of merchandise are created in its 5000 square meters workshop, the precision planetary gearbox and gear motor are produced specially for photo voltaic power industry and have served several big-scale solar projects worldwidely. 

The research team has a lot more than 15 many years ordeals in this field, who can ensure a punctual and efficient services to fulfill customer’s specific demands. It has pasted the ISO9001 top quality management technique and CE, products have been exported to plenty of nations with a vast selection software in AGV, clever robot, logistic, industrial automation, solar vitality, vessel, packaging and textile and many others.Regularly, our goal is to advertise the application of photo voltaic electrical power business in the planet, and we feel it supplies clean and sustainable vitality for humanity to much better protect our surroundings.

Teams

Certifications

FAQ

 

Q1:Which places are your products primarily utilised in?

A:At existing, we have 2 main items: precision planetary gear reducer and solar geared motor. Most of the precision planetary reducers are used in automation fields, this kind of as health-related equipment, 3D printers, door openers, tapping machines, CNC lathes and a series of automation gear. In addition, our solar geared motors are employed in photovoltaic power era assignments, which are mostly combined with rotary drives to push photo voltaic panels to track sunlight.
Q2: How to choose the suited planetary gearbox?
A :Very first of all, we need you to be CZPT to supply related parameters. If you have a motor drawing, it will allow us recommend a ideal gearbox for you faster. If not, we hope you can give the following motor parameters: output speed, output torque, voltage, present, IP, sound, running situations, motor dimension and electricity, and many others.
Q3: What is the price ?
A : The major identifying element for the price of each and every item is the get quantity. You can connect with us and let us realize every single other. I feel that our prices, item high quality and our providers can certainly make you satisfied.

This autumn: Do you give customized provider?

A: Of course, we give customized companies. You only require to place ahead your demands, and we will do our ideal to give you with a prepare, make ideas, and consider our greatest to meet your needs.

 

 

Application: Motor, Machinery, Marine, Agricultural Machinery, Laser Cutting Machine
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Double-Step

###

Samples:
US$ 60/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

SPECIFICATIONS STAGE RATIO RATED TORQUE (N.m)
SPLF60-60mm Planetry Gear Reducer  L1 4 25
5 28
7 20
10 10
L2 16 30
20 30
25 32
28 30
35 30
40 25
50 25
70 20
Adapted motor ∅ 14-30/ ∅50-3/∅70-M4
Rated Input Speed (rpm) 3000/min
Max Input Speed (rpm) 6000/min
Backlash L1 ≤10 Arcmin
L2 ≤15 Arcmin
Fault stop torque(N.m) 2 times of rated torque
Efficiency L1 96%
L2 94%
Average life span 20000h
Operating temperature -10°~+90°
Nosie  ≤60 db
Weight (kg) L1 0.75
L2 1
IP 54
Installation method Any installation method
Application: Motor, Machinery, Marine, Agricultural Machinery, Laser Cutting Machine
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Double-Step

###

Samples:
US$ 60/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

SPECIFICATIONS STAGE RATIO RATED TORQUE (N.m)
SPLF60-60mm Planetry Gear Reducer  L1 4 25
5 28
7 20
10 10
L2 16 30
20 30
25 32
28 30
35 30
40 25
50 25
70 20
Adapted motor ∅ 14-30/ ∅50-3/∅70-M4
Rated Input Speed (rpm) 3000/min
Max Input Speed (rpm) 6000/min
Backlash L1 ≤10 Arcmin
L2 ≤15 Arcmin
Fault stop torque(N.m) 2 times of rated torque
Efficiency L1 96%
L2 94%
Average life span 20000h
Operating temperature -10°~+90°
Nosie  ≤60 db
Weight (kg) L1 0.75
L2 1
IP 54
Installation method Any installation method

Planetary Gearbox

This article will explore the design and applications of a planetary gearbox. The reduction ratio of a planetary gearbox is dependent on the number of teeth in the gears. The ratios of planetary gearboxes are usually lower than those of conventional mechanical transmissions, which are mainly used to drive engines and generators. They are often the best choice for heavy-duty applications. The following are some of the advantages of planetary gearboxes.
planetarygearbox

planetary gearboxes

Planetary gearboxes work on a similar principle to solar systems. They rotate around a center gear called the sun gear, and two or more outer gears, called planet gears, are connected by a carrier. These gears then drive an output shaft. The arrangement of planet gears is similar to that of the Milky Way’s ring of planets. This arrangement produces the best torque density and stiffness for a gearbox.
As a compact alternative to normal pinion-and-gear reducers, planetary gearing offers many advantages. These characteristics make planetary gearing ideal for a variety of applications, including compactness and low weight. The efficiency of planetary gearing is enhanced by the fact that ninety percent of the input energy is transferred to the output. The gearboxes also have low noise and high torque density. Additionally, their design offers better load distribution, which contributes to a longer service life.
Planetary gears require lubrication. Because they have a smaller footprint than conventional gears, they dissipate heat well. In fact, lubrication can even lower vibration and noise. It’s also important to keep the gears properly lubricated to prevent the wear and tear that comes with use. The lubrication in planetary gears also helps keep them operating properly and reduces wear and tear on the gears.
A planetary gearbox uses multiple planetary parts to achieve the reduction goal. Each gear has an output shaft and a sun gear located in the center. The ring gear is fixed to the machine, while the sun gear is attached to a clamping system. The outer gears are connected to the carrier, and each planetary gear is held together by rings. This arrangement allows the planetary gear to be symmetrical with respect to the input shaft.
The gear ratio of a planetary gearbox is defined by the sun gear’s number of teeth. As the sun gear gets smaller, the ratio of the gear will increase. The ratio range of planetary gears ranges from 3:1 to ten to one. Eventually, however, the sun gear becomes too small, and the torque will fall significantly. The higher the ratio, the less torque the gears can transmit. So, planetary gears are often referred to as “planetary” gears.
planetarygearbox

Their design

The basic design of a Planetary Gearbox is quite simple. It consists of three interconnecting links, each of which has its own torque. The ring gear is fixed to the frame 0 at O, and the other two are fixed to each other at A and B. The ring gear, meanwhile, is attached to the planet arm 3 at O. All three parts are connected by joints. A free-body diagram is shown in Figure 9.
During the development process, the design team will divide the power to each individual planet into its respective power paths. This distribution will be based on the meshing condition of all gears in the system. Then, the design team will proceed to determine the loads on individual gear meshes. Using this method, it is possible to determine the loads on individual gear meshes and the shape of ring gear housing.
Planetary Gearboxes are made of three gear types. The sun gear is the center, which is connected to the other two gears by an internal tooth ring gear. The planet pinions are arranged in a carrier assembly that sets their spacing. The carrier also incorporates an output shaft. The three components in a Planetary Gearbox mesh with each other, and they rotate together as one. Depending on the application, they may rotate at different speeds or at different times.
The planetary gearbox’s design is unique. In a planetary gearbox, the input gear rotates around the central gear, while the outer gears are arranged around the sun gear. In addition, the ring gear holds the structure together. A carrier connects the outer gears to the output shaft. Ultimately, this gear system transmits high torque. This type of gearbox is ideal for high-speed operations.
The basic design of a Planetary Gearbox consists of multiple contacts that must mesh with each other. A single planet has an integer number of teeth, while the ring has a non-integer number. The teeth of the planets must mesh with each other, as well as the sun. The tooth counts, as well as the planet spacing, play a role in the design. A planetary gearbox must have an integer number of teeth to function properly.

Applications

In addition to the above-mentioned applications, planetary gearing is also used in machine tools, plastic machinery, derrick and dock cranes, and material handling equipments. Further, its application is found in dredging equipment, road-making machinery, sugar crystallizers, and mill drives. While its versatility and efficiency makes it a desirable choice for many industries, its complicated structure and construction make it a complex component.
Among the many benefits of using a planetary gearbox, the ability to transmit greater torque into a controlled space makes it a popular choice for many industries. Moreover, adding additional planet gears increases the torque density. This makes planetary gears suitable for applications requiring high torque. They are also used in electric screwdrivers and turbine engines. However, they are not used in everything. Some of the more common applications are discussed below:
One of the most important features of planetary gearboxes is their compact footprint. They are able to transmit torque while at the same time reducing noise and vibration. In addition to this, they are able to achieve a high speed without sacrificing high-quality performance. The compact footprint of these gears also allows them to be used in high-speed applications. In some cases, a planetary gearbox has sliding sections. Some of these sections are lubricated with oil, while others may require a synthetic gel. Despite these unique features, planetary gears have become common in many industries.
Planetary gears are composed of three components. The sun gear is the input gear, whereas the planet gears are the output gears. They are connected by a carrier. The carrier connects the input shaft with the output shaft. A planetary gearbox can be designed for various requirements, and the type you use will depend on the needs of your application. Its design and performance must meet your application’s needs.
The ratios of planetary gears vary depending on the number of planets. The smaller the sun gear, the greater the ratio. When planetary stages are used alone, the ratio range is 3:1 to 10:1. Higher ratios can be obtained by connecting several planetary stages together in the same ring gear. This method is known as a multi-stage gearbox. However, it can only be used in large gearboxes.
planetarygearbox

Maintenance

The main component of a planetary gearbox is the planetary gear. It requires regular maintenance and cleaning to remain in top shape. Demand for a longer life span protects all other components of the gearbox. This article will discuss the maintenance and cleaning procedures for planetary gears. After reading this article, you should know how to maintain your planetary gearbox properly. Hopefully, you can enjoy a longer life with your gearbox.
Firstly, it is important to know how to properly lubricate a planetary gearbox. The lubricant is essential as gears that operate at high speeds are subject to high levels of heat and friction. The housing of the planetary gearbox should be constructed to allow the heat to dissipate. The recommended oil is synthetic, and it should be filled between 30 and 50 percent. The lubricant should be changed at least every six months or as needed.
While it may seem unnecessary to replace a planetary gearbox, regular servicing will help it last a long time. A regular inspection will identify a problem and the appropriate repairs are needed. Once the planetary gearbox is full, it will plug with gear oil. To avoid this problem, consider getting the unit repaired instead of replacing the gearbox. This can save you a lot of money over a new planetary gearbox.
Proper lubrication is essential for a long life of your planetary gearbox. Oil change frequency should be based on oil temperature and operating speed. Oil at higher temperatures should be changed more frequently because it loses its molecular structure and cannot form a protective film. After this, oil filter maintenance should be performed every few months. Lastly, the gearbox oil needs to be checked regularly and replaced when necessary.

China 70: 1 Ratio 45n. M Torque Planetary Gearbox     compound planetary gearboxChina 70: 1 Ratio 45n. M Torque Planetary Gearbox     compound planetary gearbox
editor by czh 2022-12-12

Recent Posts