China High Torque 90 Degree Right Angle Planetary Reducer Gearbox cyclo planetary gearbox

Solution Description

Substantial Torque ninety Degree Correct Angle Planetary Reducer Gearbox

Nickel chromium molybdenum alloy steel equipment is manufactured with carburizing heat therapy for substantial abrasion resistance and impact toughness and by honing approach to increase equipment precision and minimal noise procedure.Inside gear bore utilizes needle roller to get higher abrasion resistance and energy.
Description:
(1).The output shaft is manufactured of large dimensions,large span double bearing layout,output shaft and planetary arm bracket as a total.The input shaft is positioned directly on the planet arm bracket to guarantee that the reducer has large working precision and maximum torsional rigidity.
(2).Shell and the interior ring equipment employed integrated design and style,quenching and tempering after the processing of the tooth so that it can obtain high torque,high precision,higher wear resistance.Furthermore area nickel-plated anti-rust treatment method,so that its corrosion resistance significantly increased.
(3).The planetary equipment transmission employs full needle roller without having retainer to enhance the speak to floor,which tremendously upgrades structural rigidity and services life.
(4).The gear is produced of Japanese imported content.Following the metal cutting method,the vacuum carburizing warmth therapy to 58-62HRC. And then by the hobbing,Get the ideal tooth condition,tooth route,to ensure that the gear of high precision and good effect toughness.
(5).Input shaft and sun gear integrated framework,in buy to enhance the operation precision of the reducer.

Product Parameters

one.With bevel gear reversing system,appropriate angle steering output is realized.
two.Round flange output.threaded link,standardized dimension.
three.The enter link technical specs are full and there are male choices.
four.Straight tooth transmission,solitary cantilever framework, straightforward design and high expense overall performance.
5.Keyway can be opened in the drive shaft.
6.Return backlash 8-sixteen arcmin.

Specifications PVLN60 PVLN90 PVLN120
Technal Parameters
Max. Torque Nm 1.5times rated torque
Emergency Cease Torque Nm 2.5times rated torque
Max. Radial Load N 240 450 1240
Max. Axial Load N 220 430 1000
Torsional Rigidity Nm/arcmin one.8 four.eighty five eleven
Max.Input Pace rpm 8000 6000 6000
Rated Enter Pace rpm 4000 3500 3500
Noise dB ≤58 ≤60 ≤65
Average Daily life Time h 20000
Efficiency Of Full Load % L1≥95%       L2≥92%
Return Backlash P1 L1 arcmin ≤8 ≤8 ≤8
L2 arcmin ≤12 ≤12 ≤12
P2 L1 arcmin ≤16 ≤16 ≤16
L2 arcmin ≤20 ≤20 ≤20
Instant Of Inertia Desk L1 three Kg*cm2 .46 1.73 12.seventy eight
4 Kg*cm2 .forty six 1.73 twelve.seventy eight
5 Kg*cm2 .forty six one.73 twelve.78
7 Kg*cm2 .forty one one.42 eleven.38
ten Kg*cm2 .forty one 1.42 eleven.38
L2 12 Kg*cm2 .forty four 1.49 12.18
15 Kg*cm2 .forty four one.49 twelve.eighteen
16 Kg*cm2 .seventy two one.49 twelve.eighteen
twenty Kg*cm2 .forty four 1.forty nine 12.eighteen
twenty five Kg*cm2 .forty four one.49 12.eighteen
28 Kg*cm2 .44 one.forty nine 12.eighteen
thirty Kg*cm2 .forty four one.forty nine 12.eighteen
35 Kg*cm2 .forty four one.49 twelve.eighteen
forty Kg*cm2 .44 1.49 twelve.eighteen
fifty Kg*cm2 .34 1.25 11.forty eight
70 Kg*cm2 .34 one.25 11.forty eight
a hundred Kg*cm2 .34 1.25 eleven.48
Technological Parameter Level Ratio   PVLN60 PVLN90 PVLN120
Rated Torque L1 three Nm 27 ninety six 161
4 Nm 40 122 210
five Nm forty 122 210
seven Nm 34 ninety five one hundred seventy
10 Nm sixteen fifty six 86
L2 twelve Nm 27 ninety six 161
fifteen Nm 27 ninety six 161
16 Nm forty 122 210
twenty Nm forty 122 210
twenty five Nm 40 122 210
28 Nm forty 122 210
thirty Nm 27 ninety six 161
35 Nm 40 122 210
40 Nm forty 122 210
50 Nm forty 122 210
70 Nm 34 95 one hundred seventy
100 Nm 16 fifty six 86
Degree Of Safety   IP65
Operation Temprature ºC  – 10ºC to -90ºC
Weight L1 kg one.7 four.four 12
L2 kg 1.nine five fourteen

Organization Profile

Application: Motor, Motorcycle, Machinery, Marine, Agricultural Machinery, Textile Machinery
Function: Change Drive Direction, Speed Changing, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Single-Step

###

Samples:
US$ 300/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Specifications PVLN60 PVLN90 PVLN120
Technal Parameters
Max. Torque Nm 1.5times rated torque
Emergency Stop Torque Nm 2.5times rated torque
Max. Radial Load N 240 450 1240
Max. Axial Load N 220 430 1000
Torsional Rigidity Nm/arcmin 1.8 4.85 11
Max.Input Speed rpm 8000 6000 6000
Rated Input Speed rpm 4000 3500 3500
Noise dB 58 ≤60 ≤65
Average Life Time h 20000
Efficiency Of Full Load % L195%       L292%
Return Backlash P1 L1 arcmin ≤8 ≤8 ≤8
L2 arcmin ≤12 ≤12 ≤12
P2 L1 arcmin ≤16 ≤16 ≤16
L2 arcmin ≤20 ≤20 ≤20
Moment Of Inertia Table L1 3 Kg*cm2 0.46 1.73 12.78
4 Kg*cm2 0.46 1.73 12.78
5 Kg*cm2 0.46 1.73 12.78
7 Kg*cm2 0.41 1.42 11.38
10 Kg*cm2 0.41 1.42 11.38
L2 12 Kg*cm2 0.44 1.49 12.18
15 Kg*cm2 0.44 1.49 12.18
16 Kg*cm2 0.72 1.49 12.18
20 Kg*cm2 0.44 1.49 12.18
25 Kg*cm2 0.44 1.49 12.18
28 Kg*cm2 0.44 1.49 12.18
30 Kg*cm2 0.44 1.49 12.18
35 Kg*cm2 0.44 1.49 12.18
40 Kg*cm2 0.44 1.49 12.18
50 Kg*cm2 0.34 1.25 11.48
70 Kg*cm2 0.34 1.25 11.48
100 Kg*cm2 0.34 1.25 11.48
Technical Parameter Level Ratio   PVLN60 PVLN90 PVLN120
Rated Torque L1 3 Nm 27 96 161
4 Nm 40 122 210
5 Nm 40 122 210
7 Nm 34 95 170
10 Nm 16 56 86
L2 12 Nm 27 96 161
15 Nm 27 96 161
16 Nm 40 122 210
20 Nm 40 122 210
25 Nm 40 122 210
28 Nm 40 122 210
30 Nm 27 96 161
35 Nm 40 122 210
40 Nm 40 122 210
50 Nm 40 122 210
70 Nm 34 95 170
100 Nm 16 56 86
Degree Of Protection   IP65
Operation Temprature ºC  – 10ºC to -90ºC
Weight L1 kg 1.7 4.4 12
L2 kg 1.9 5 14
Application: Motor, Motorcycle, Machinery, Marine, Agricultural Machinery, Textile Machinery
Function: Change Drive Direction, Speed Changing, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Single-Step

###

Samples:
US$ 300/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Specifications PVLN60 PVLN90 PVLN120
Technal Parameters
Max. Torque Nm 1.5times rated torque
Emergency Stop Torque Nm 2.5times rated torque
Max. Radial Load N 240 450 1240
Max. Axial Load N 220 430 1000
Torsional Rigidity Nm/arcmin 1.8 4.85 11
Max.Input Speed rpm 8000 6000 6000
Rated Input Speed rpm 4000 3500 3500
Noise dB 58 ≤60 ≤65
Average Life Time h 20000
Efficiency Of Full Load % L195%       L292%
Return Backlash P1 L1 arcmin ≤8 ≤8 ≤8
L2 arcmin ≤12 ≤12 ≤12
P2 L1 arcmin ≤16 ≤16 ≤16
L2 arcmin ≤20 ≤20 ≤20
Moment Of Inertia Table L1 3 Kg*cm2 0.46 1.73 12.78
4 Kg*cm2 0.46 1.73 12.78
5 Kg*cm2 0.46 1.73 12.78
7 Kg*cm2 0.41 1.42 11.38
10 Kg*cm2 0.41 1.42 11.38
L2 12 Kg*cm2 0.44 1.49 12.18
15 Kg*cm2 0.44 1.49 12.18
16 Kg*cm2 0.72 1.49 12.18
20 Kg*cm2 0.44 1.49 12.18
25 Kg*cm2 0.44 1.49 12.18
28 Kg*cm2 0.44 1.49 12.18
30 Kg*cm2 0.44 1.49 12.18
35 Kg*cm2 0.44 1.49 12.18
40 Kg*cm2 0.44 1.49 12.18
50 Kg*cm2 0.34 1.25 11.48
70 Kg*cm2 0.34 1.25 11.48
100 Kg*cm2 0.34 1.25 11.48
Technical Parameter Level Ratio   PVLN60 PVLN90 PVLN120
Rated Torque L1 3 Nm 27 96 161
4 Nm 40 122 210
5 Nm 40 122 210
7 Nm 34 95 170
10 Nm 16 56 86
L2 12 Nm 27 96 161
15 Nm 27 96 161
16 Nm 40 122 210
20 Nm 40 122 210
25 Nm 40 122 210
28 Nm 40 122 210
30 Nm 27 96 161
35 Nm 40 122 210
40 Nm 40 122 210
50 Nm 40 122 210
70 Nm 34 95 170
100 Nm 16 56 86
Degree Of Protection   IP65
Operation Temprature ºC  – 10ºC to -90ºC
Weight L1 kg 1.7 4.4 12
L2 kg 1.9 5 14

Types, Applications, and Lubrication of Planetary Gearboxes

A Planetary Gearbox is a device that can be used in a variety of applications. Their reduction ratios depend on the number of teeth in each gear. In this article, we will discuss the types, applications, and lubrication of planetary gearboxes. Hopefully, this article will be of help to you. If not, you can check out this article and discover more about this fascinating machine. There are many different types of planetary gearboxes.
planetarygearbox

Applications of planetary gearboxes

The planetary gearbox is a popular option for applications requiring precise positioning. Applications of the planetary gearbox range from plastic machinery to agricultural equipment, from goods & personnel lifts to industrial robotics. Some of the industries that benefit from this type of gearbox include robotics, intra-logistics, robotics for industrial automation, and medical equipment. Increasing automation is also fueling the growth of the industrial planetary gearbox market in APAC.
The compact design of planetary gears makes them excellent for reducing load inertia and maximizing torque. However, some applications require additional lubrication for sustained performance or high speeds. CZPT uses CZPT in its planetary gearboxes. In addition, lubrication prevents gear wear and minimizes noise and vibration. The planetary gearbox is also easy to install, thanks to its low-mass-inertia design.
Another application of the planetary gearbox is in axles and transfer cases. The planetary gear architecture consists of a sun gear, also called the central gear, and a ring-gear with internal teeth that are concentric to the sun gear. The two gears are connected via a carrier, and the output shaft is positioned on the ring-gear carrier. The gearbox can be configured in a variety of ways, depending on the speed-ratio requirements.
The planetary gear train is similar to that of a solar system. It comprises a sun gear and two or more outer gears, ring gear and carrier assembly. In this configuration, the outer gears are connected via a carrier and a ring gear. The planet gears are in constant mesh with each other, and power applied to one of these members will rotate the whole assembly. They are a very efficient choice for many applications.

Types

There are three types of planetary gearboxes, depending on their performance and efficiency. The basic model is highly efficient and transmits up to 97% of power input. Depending on the speed and torque that need to be transmitted, planetary gearboxes are used in many different applications. A planetary gearbox can reduce the speed of a roller or produce a more precise level of movement. Using a planetary gearbox for your printing press, for example, will maximize your gear transmission ratio.
This market research report analyzes the factors influencing the market for Planetary Gearboxes, as well as their sales and revenues. It also highlights industry trends and details the competitive landscape. It also provides a comprehensive analysis of the Planetary Gearbox industry and its drivers and restraints. It provides detailed information on the market size and future growth prospects. The study also includes an extensive discussion of the competitive landscape, identifying the top companies and key market players.
A planetary gearbox is often used to manufacture complicated machines. These gears are usually made of high-quality steel, which makes them extremely durable. Planetary gearboxes can also be used in the production of heavy machine elements. There are many benefits of a planetary gearbox, including its compactness and low mass inertia. The main advantage of a planetary gearbox is its ability to distribute torque. Compared to a normal gearbox, planetary gearboxes can provide torque that is nearly three times higher than its conventional counterpart.
The three main types of planetary gears are the single-stage, compound, and multi-stage. The general concept of a planetary gear is referred to as a compound planetary gear. This means that planetary gears are made up of one of these three basic structures: a meshed-planet structure, a shaft, and a multi-stage structure. This type of gear has multiple stages and is particularly useful for fast-dynamic laser cutting machines.
planetarygearbox

Design

A planetary gearbox is similar to a car’s transmission. All of its gears must have a certain number of teeth and be spaced equally apart. The teeth of a planet must mesh with the gears of the ring and sun to be functional. The number of teeth needed will depend on the number of planets and their spacing. This equation is a good starting point for designing a gearbox.
The dynamic properties of planetary gears are investigated using a parametric model. The stiffness of the mesh changes as the number of gear tooth pairs in contact varies during the gear rotation. Small disturbances in design realizations cause nonlinear dynamics, which results in noise and vibrations in the gear transmission. A mathematical system describing this process is developed using the basic principles of analytical mechanics. This mathematical model can be used to optimize any planetary gear.
This analysis assumes that the sun gear and planet gears have the same design modulus, which is a fundamental requirement of any mechanical gear. In reality, the ratio of these two gears is 24/16 versus -3/2. This means that a planetary gearbox’s output torque is 41.1 times the input torque. Considering this factor, we can make an accurate estimate of the total torque. The planetary gears are mounted face-to-face and connected to an electric motor.
A planetary gear set has to have a certain number of teeth that are odd or even. One way to overcome this issue is to double the number of teeth on the sun gear and the annulus gear. This will also solve irregularities. Another way to design a planetary gear set is to use the appropriate diametral pitch and module. There are many planetary gear sets available on the market, so it pays to understand the differences.

Lubrication

Lubrication for Planetary Gearboxes is important for the smooth functioning of the gear. Planetary gears are subjected to high levels of friction and heat, so they require regular lubrication. The gear housing is designed to dissipate heat away from the gear, but heat can still enter the gear, which can result in a poor lubrication condition. The best lubrication solution is synthetic oil, and the gear should be refilled with a minimum of 30 percent oil.
When lubricating a planetary gearbox, it is important to note that hydraulic oil is not suitable for planetary gearboxes, which cost over $1500. Hydraulic oil does not have the same viscosity and behavior with temperature fluctuations, making it less effective. The planetary gearbox may also overheat if a hose is not provided for case draining. A case drain hose is essential to prevent this from happening, because hot oil can cause overheating of the gearbox and damage to the gears.
Oil delivery conduits are positioned between each pair of planet gears. Each oil delivery conduit directs fresh oil toward the sun gear and the planet gear. The oil then disperses and exits from the gear train with considerable tangential velocity. The oil is redirected into a collection channel (56). The preferred embodiment uses herringbone gears, which pump oil axially outward into the channels.
The best way to choose the right type of lubrication is to consider its viscosity. Too high a viscosity will prevent the lubricant from flowing properly, which will cause metal-to-metal contact. The oil must also be compatible with the gearbox temperature. A suitable viscosity will increase the efficiency of the gearbox and prevent downtime. A reliable gearbox will ultimately result in higher profits and fewer costs.
planetarygearbox

Applications

This report examines the Industrial Planetary Gearbox Market and its current trends. It identifies the pre and post-COVID-19 effects of the industry. It outlines the advantages and disadvantages of the industrial planetary gearbox market. The report also explains the diverse financing resources and business models of the market. It includes the key players in the industry. Hence, it is essential to read this report carefully.
The report includes analysis and forecasts of the global market for planetary gearbox. It includes the product introductions, key business factors, regional and type segments, and end-users. It covers the sales and revenue of the market for each application field. The report also includes the regional and country-level market data. It also focuses on the market share of the key companies operating in the industry. It covers the competitive scenario in the global planetary gearbox market.
Another popular application for planetary gearboxes is in the toy industry. It is possible to design toys that look stunning with planetary gear systems. In addition to toys, clock makers also benefit from the planetary arrangement. In addition to producing a good-looking clock, this gearbox can reduce inertia and improve its efficiency. The planetary gearbox is easy to maintain, which makes it a good choice for clock applications.
In addition to traditional gear reductions, planetary gears are also used for 3D printing. Their huge gear ratio makes 3D printing easier. Furthermore, planetary gears are used to drive stepper motors, which turn much faster and produce a desired output. There are numerous industrial uses for planetary gearboxes. This article has explored a few of the most common ones. And don’t forget to explore their uses.

China High Torque 90 Degree Right Angle Planetary Reducer Gearbox     cyclo planetary gearboxChina High Torque 90 Degree Right Angle Planetary Reducer Gearbox     cyclo planetary gearbox
editor by czh 2023-01-17

Recent Posts